{"product_id":"digga-mm14k-anchor-drive-for-skid-steers","title":"Digga-MM14K Anchor Drive for Skid Steers","description":"\u003ch3 data-path-to-node=\"1\"\u003eEngineered for Performance and Durability\u003c\/h3\u003e\n\u003cp data-path-to-node=\"2\"\u003eAt the heart of the MM14K is a high-efficiency Char-Lynn hydraulic motor capable of handling up to 25kW of continuous power. Despite its lightweight and compact gearbox (weighing only 66kg), the unit delivers a formidable nominal torque of approximately 14,000 Nm at 205 bar. This power-to-weight ratio allows the drive to perform tasks typically reserved for much larger units, such as the Digga PD15, but with the added benefit of maneuverability in confined spaces.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eOne of the standout technical features is Digga’s advanced two-piece shaft design. By separating the shaft from the planetary carrier, the gearbox isolates the internal gears from the aggressive pushing, pulling, and bending forces generated by the host machine. This design results in side load ratings that are more than double those of competitors, ensuring the bearings maintain axial and side loading efficiency even under extreme torque.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"4\"\u003eInnovation in Geometry: The Gimbal Mount\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eStandard machine mounts can often be bulky, limiting the vertical reach of a skid steer and forcing operators to use shorter screw piles. The MM14K addresses this with a unique gimbal mounting system. By eliminating the traditional machine linkage, the gimbal mount significantly reduces the overall height of the setup. This allows the skid steer to operate in low-headroom environments while maximizing the length of the augers or piers that can be utilized—a critical advantage for foundation work in existing structures or under tree canopies.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"6\"\u003ePrecision Installation with HALO\u003c\/h3\u003e\n\u003cp data-path-to-node=\"7\"\u003ePerhaps the most significant advancement included in the MM14K is the \u003cb data-index-in-node=\"70\" data-path-to-node=\"7\"\u003eHALO alignment system\u003c\/b\u003e, which now comes as standard. Precision is paramount in screw piling; an anchor installed at an incorrect angle can compromise the structural integrity of the entire foundation. HALO uses a ring of LED lights located in the hood of the drive to provide real-time feedback to the operator. When the lights are green, the drive is perfectly plumb. If the unit tilts, a sequence of red and green lights guides the operator back to center. This eliminates the need for a secondary spotter on the ground, enhancing both safety and accuracy on the job site.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"8\"\u003eSpecifications and Compatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"9\"\u003eDesigned for skid steers up to 5.0 tonnes, the MM14K is built for versatility. It features a 75mm square output shaft and a robust hitch system designed to withstand the rigors of heavy-duty ground engagement. With a maximum flow rate of 70 lpm and a maximum pressure of 205 bar, it integrates seamlessly with the hydraulic systems of most modern compact loaders.\u003c\/p\u003e\n\u003cp data-path-to-node=\"10\"\u003eIn conclusion, the Digga MM14K is more than just a hydraulic motor; it is a sophisticated system that brings \"big machine\" piling capabilities to the compact loader market. Proudly manufactured in Australia and backed by over 40 years of engineering experience, it offers contractors a reliable, precise, and powerful solution for modern foundation challenges.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTechnical Specifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100.093%; height: 284.907px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eMax Torque @ 205 Bar\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e14,206 Nm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eMotor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eGeroler\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003ePressure Valve Fitted\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eN \/ A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eEnergy Control Valve\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eN \/ A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eMax Pressure\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eDo not exceed 205 bar @ 70 lpm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eMax Flow\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eDo not exceed 70 lpm @ 205 bar\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eMax Continuous Power\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eDo not exceed 25Kw (33hp)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eGearbox Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e640 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eGearbox Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e290 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eGearbox Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e66kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 10.5938px;\"\u003e\u003cspan\u003eStd Output Shaft\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 10.5938px;\"\u003e\u003cspan\u003e75 mm Square\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eHitch Weight \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e47.5kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eHitch Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e785mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eHitch Width\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003e350mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 56.626%; height: 19.5938px;\"\u003e\u003cspan\u003eHALO\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 42.9203%; height: 19.5938px;\"\u003e\u003cspan\u003eIncluded\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e*Weight may vary depending on machine mount\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eScrew Piles\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eScrew Anchors\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eFencing Installation\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eSign Post Installation\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eFoundation Work\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eLandscaping\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eVineyard Trellising\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eAny application requiring precise and efficient anchor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCurrent built time is 3-4 weeks from order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Digga","offers":[{"title":"Default Title","offer_id":53380548329685,"sku":"Digga-MM-000002","price":7980.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/9658\/9957\/files\/MM-000002-03.png?v=1773266251","url":"https:\/\/www.earthmovingwarehouse.com.au\/products\/digga-mm14k-anchor-drive-for-skid-steers","provider":"Earthmoving Warehouse","version":"1.0","type":"link"}